Woodpecker DTE Style Cordless Dental LED Curing Light Lamp 1 Sec Resin Cure Lamp

Description

AZ688-2 Wireless Curing Light Descriptions:
Wireless LED Curing Light 2000mw/cm² Lamp Test Meter Optical Fiber
Because of the Built-in battery of this product and the strict customs,
Please be more familiar with local customs and the circumstances before buying.
Thanks for your understanding!!!
The new brand high quality of curing light has main advantages of others as follows:
1. Excellent quality with competitive price
2. Quick delivery and best service
3. Service tools for dental and easy to maintain and recharge conveniently
4. Large capacity Li-battery can be used for a long one with full charging.
5. Plenty of fiber rods with very reasonable price on sale for you replacement
6. Composes of high power LED, qualified fiber rod.
7. Noiseless; No libration; Generate little heat when working.
8. Imported high power LED and four chips inside.
1. Blue-ray output wavelength:430-485nm.
2. Gradually bright, shiny,bright-wide, the work of three models to choose.
3. Three gear output timing:5s 10s 15s 20s 25s 30s 35s 40s
4. Blue-ray illumination: 5W≥18
5.The effect of curing time: 6s: 2-3mm.
6. Reliable structure and easy operation.
Technical Specifications:
Wavelength: 380-515nm2
Power density: 99-999mw/cm
Only for light probe with a circular emission window: 08-12mm
Measuring accuracy: +/-20%
Adjustable light intensity: 2000mw/cm2
Operating conditions:
Temperature :+10℃to +40℃
Relative humidity: 30% to 75%
Ambient pressure: 700hpa to 1060hpa
Technical parameters:
Output power-----------5w
Size ----------------------diameter 270*208*118mm
Weight-------------------720g
Working voltage--------100-240V AC, 50-60HZ
Packing List:
Main engine of light-curing Device------1 set
Optical Fiber--------------------------------1 piece
Battery----------------------------------------1 piece
Battery Charge Seat-------------------------1 set
Shade Board ---------------------------------1 piece
Instruction Booklet -------------------------1 piece
YS-C Curing Light Features
NAME：LED curing light
MODEl：YS-C
This high power 2700mw/c㎡ LED Curing Light has a humanity intelligent chip with a high intensity
LED light and Li-on rechargeable battery.
This device can cure all the dental resin known in the market nowadays; with a performance level far
superior than the halogen curing light's, it has 3 different working modes and it can solidify 4-5mm
deepness in a few seconds.
Benefits：
1)Very convenient to operate.
2)Small size,cordless and light weighted.
3)No dazzling strong light which allows you to aim the light to the exact position and improve the effectiveness of the treatment.
4)No vibration.
5)Noiseless operation.
6)High power rechargeable battery.
7)High powerful light intensity with a maximum reach of 2700MW/cm2.
8)3 different working time modes,exposure time for optional curing:8s/6s/4s.
9) You can select the correct mode according to the different types of material you wish to cure,their speed of reaction,and the clinical protocol you are following.
Best Quality Materials:
* Mono-fibered glass light guides for various applications.
* Anodized aluminum handpiece.
* Latest generation of CMS electronics.
* Very high-quality single L.E.D.
* Li-lon battery with no memory effect
Design and Ergonomics:
* Silent and hygienic, no fan.
* Round surfaces allow for easy and comfortable manipulation.
* Compact, lightweight and well-balanced light guide rotates through 360°.
* Base-charger can be turned in all directions and low battery warning.
* Can be used anywhere in the world. The voltage input is 110V-240V and we will provide you
with the correct according to the shipping destination.
Specifications:
- Blue Light Intensity: 2700mw/c㎡
- Rechargeable Li-ion battery
- Spectrum Range: 420nm- 480nm
- Power : AC110-230V / 50-60Hz
- Time option:8s/6s/4s
- Weight: 0.65kg
-Full Metal shell
Package Includes:
1 LED Curing Light Device
1 High Capacity Rechargeable Battery
1 Charger
1 Charger Socket
X2 Curing Light Feature:
Technical Parameters:
Light Source:Broad Band LED;
Wavelength Range:385 - 515 nm;
Light Intensity:> 2300mW / cm²;
Battery:Lithium-ion battery (total running time when the battery is fully charged: at least 80 minutes);
Power Input Power:AC 100-240V 50 / 60Hz;
Charging time: about 45 minutes;
Size:Handle:Φ20 mm × 240 mm; Charging stand: Φ63 mm × 30 mm (all of the above are the largest size)
Weight: Handle: 96 grams; Charging seat: 99 grams;
Operating ambient temperature: + 10℃ - + 40℃(+ 50 °F - + 70°F);
Operating relative humidity: 30% - 75%;
Operating environment pressure:700hPa - 1060hPa;
Package Contents:
1 × host handle;
1 × charging base;
1 × power ;
1 × user manual.
Operation and function description:
The entire handle is only one button, light built-in button.
1. For the first time, charge the light curing handle first. the USB cable of the charger into the USB port of the power ,the power into the power socket, and finally
Put the handle on the charging stand; or, insert the USB cable of the charging stand into the USB port of the computer, and then put the handle on the charging stand. Charging instructions are as follows:
| Emerald Flashing | Battery charging;
| Emerald green light | battery fully charged; handle removed the charging seat, the restoration of the previous working mode.
2. Working mode selection, by pressing the button for 2 seconds to release to switch the working mode.
| Blinking Blue | Progressive mode, working time 10 seconds, light intensity 0-5 seconds from 0-1200mW / cm², 5-10 seconds 1200mW / cm².
| Solid blue | Fast mode, working time 3 seconds, light intensity 2300mW / cm ²
3. Turn the light curing lamp on and off, press the button briefly.
4. Switch machine, in standby mode, press the button a short time to open the instrument; stop any operation for 60 seconds, into the ultra-low power standby.
WOODPECKER F*LED-B Curing Light Feature:
Model:LED.B
Wireless
Long standby time
Working more efficiently
Function Keys:
ON/OFF button：
Turn on or turn off the LED blue-ray output
Can make the machine run
Time setting: 5s, 10s, 15s, 20s,25s,30s,35s,40s
Technical:
Charger input:110V-240VAC 50-60Hz
The charger output:DC4.2V 1A
Lithium battery voltage:DC3.7V
Lithium battery capacity:1500mAh
Output optical wavelength:420-480nm
Output light intensity:1200-1400mw/cm2
1set Package:
1 X Curing light
1 X High capacitance rechargeable battery
1 X Charger
1 X Charger socket
Cv -gun 1 Sec White
Introduction:
1.Technical specifications：
1.1Dimensions: 25mm×25mm×240mm
1.2 Net weight: 280g
1.3 Power source
1.3.1 Power supply: rechargeable Lithium battery
1.3.2 Battery mode: ICR 18490
1.3.3 Battery voltage and capacity: 3.7V/ 1400mAh,Battery has protection against Over-voltage, over-current and short circuit.
1.3.4 Power Input: 100V to 240V, 50Hz/60 Hz Input Power: 10VA Power Output: DC5V/1A
1.4 Light source:
1.4.1 5W high power blue light LED
1.4.2 Checking method: the LED light is fine when the light is on during operating correctly.
1.4.3 The wave length of this product can match with the clinical dental resin solidification, such as 3M, Dentsply etc.
1.4.4 Wave length: 385nm-515nm
1.5 Light intensity: 1000 mW/c㎡~2300mW/c㎡
2. Operation：
2.1 Press the mode button. Following two modes are available.
2.1.1 TURBO Mode: screen shows P1, Press the time button to select of time which could be 1 and 3 seconds.Its output light intensity is about 1800 mW/c㎡-2300mW/cm2
2.1.2 NORMAL Mode: screen shows P2, Press the time button to select of time which could be 5,10 ,15and 20 seconds.Its output light intensity is about 1000 mW/c㎡-1200 mW/c㎡
2.2 During the operation, put the disposable sleeve on the top of the main unit, aim the top at the correct position, press the ON/OFF button and the main unit will produce "Bi" sound, the curing light radiates blue light and starts working according to the set modes. Meanwhile, it starts counting down and will produce tone at every 5 seconds, it stops working when counting down to "0".
2.3 During operation, the blue light can be stopped by press the power button at any time.
2.4 After a working cycle, operator can press the ON/OFF switch to start another working cycle. Stop operating if the equipment began to heat obviously, do not restart until the equipment cool down. Suggest continues working cycle less than 10 times.
2.5 Low power detective circuit is fixed inside of the main unit, when low power is detected, the display screen of main unit will wink, please charge in time.
2.6 When the battery needs to be charged, connect the of the into the AC100V~240V power supply. Then connect the output of the to the DC 5.0V input of the pedestal, and then the logo turn to blue. Put the main unit to the charging point of the pedestal, the display screen turn to scrolling display, and the curing lights starts charging.
2.7 After operating, take off the disposable sleeve and throw away, forbidden to reuse.
2.8 This equipment will turn off automatically if don't any action within 2 minutes, turn it on by press any button.
2.9 The depth of solidification of composite is no less than 2mm per 1 second.
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller name:Dentistworld
City State: SHENZHEN,China
Telephone number:0755-69985450
We accept PayPal Only! All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don't buy an item if you can't/won't pay for it.
Paypal is the easiest way to pay for items on eBay. Please make sure your Paypal and eBay accounts have the same physical address used for delivery and the same e-mail address to ensure payment confirmation.
Shipping: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
If the item you received is damaged or defective,Please contact us immidately.We will free exchange or refund.
We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges.
You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts.
Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding!
The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events.
General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal. Shipping:Import duties,taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.
Destination
Delivery Time
Working Days
7-10
10-15
15-25
25-40
>50
US
Item arrived
80%
10%
8%
1%
Refund
ASIA
Item arrived
30%
40%
20%
10%
Refund
EU
Item arrived
20%
20%
50%
10%
Refund
AU
Item arrived
30%
30%
20%
20%
Refund
other countries
Item arrived
5%
10%
10%
60%
--
You feedback is VERY important to us
Please leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment. Please leave us with any concerns prior to leave negative feedback, as we can only correct issues when we are aware of them. We understand the concerns and frustrations you might have, and will try our best to resolve the isuues.
Serivce is our #1 priority at BAISTRA!
If you contact us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped.
We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy at BAISTRA. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right!
On May-31-17 at 03:29:20 PDT, seller added the following information: