TRON LEGACY Identity Disc V2.0 UPGRADE KIT DIY - TESTED NO DEAD LEDS

Description

Hello Fellow Tron Fans (Programs),
I
am selling an Upgrade Kit for your existing Tron Identity disc.   Are you up for the challenge?  This is a Do it yourself (DIY) kit.
Modify your
existing
Shanghai Disneyland or Spin Master
Tron Legacy Deluxe
:  Sam Flynn, Kevin Flynn, or Rinzler Identity discs with this upgrade kit.  Keep your disc lights permanently on with these higher voltage LEDs that illuminate brightly.  Folks in the past had to remove the sounds for modifications, but you don't have to remove the sounds if you like them.  I have created a special printed V2.0 Kit Guide/Tutorial which will be included when you purchase this kit.
Each wire in the
upgrade kit is labeled for faster modification.  All LEDs are cut to precision and tested before being packaged out.  I guarantee no dead LEDs.
NOTE
:
You
do not
get a Tron Identity Disc with this kit.  The
LED colors that you order are the ones that you will receive.  For example:  If you order a "v2.0 (white/white)", this indicates that the LEDs for your Inner Ring and Outer Ring will be white.  The pictures shown in the listing above provide a representation of the LED colors for discs that have been modified.  The exact upgrade/modification kit contents are listed below.
Each LED strip is cut to fit inside the disc and has soldered wires for positive/negative connections.  All pictures of discs are meant to show what your final modification may look like.
Please, If you have any questions, ask them before you purchase as there are no returns on the kits.
The "v2.0" Tron Legacy Identity Disc Upgrade/Modification Kit includes the following:
-2 x Black Switches
-8 x Super Strong Nickel Neodymium Magnets
-2 x 12V Battery
-2 x 12V Battery Holder
-4 x LED Inserts (Holographic Posts)
-1 x LED Strip Light (Inner Ring)
-1 x LED Strip Light (Outer Ring)
-1 x V2.0 Tron Upgrade Guide/Tutorial (Printed Manual) [UPDATED OCT 20018 ->Due to "Speedyskier39" Feedback, Appreciate the honest feedback, Hope this one is better!]
Below are videos of modified discs that I had done.  This will help you get an idea of modifying your disc.
Kevin Flynn:
White Outer/White Inner LEDs (KEVIN_FLYNN)
Sam Flynn:
Blue Outer /Blue Inner LEDs (SAM_FLYNN)
Rinzler/CLU:
Orange Outer/Orange Inner LEDs (RINZLER/CLU)
Sam Flynn V1.0 with Edge Cut:
V1.0 Identity Disc (SAM_FLYNN - BLUE)
Sam Flynn V1.0 with Edge Cut vs. Sam Flynn V2.0 Disc:
V1.0 vs. V2.0 Identity Disc (SAM_FLYNN - BLUE)
NOTE
:  Once you receive the kit and if you find it difficult to modify your disc or you may not have all the tools necessary; I can modify your V2.0 disc for an additional + shipping.  Just send me back the kit plus your existing Tron Identity disc and I'll take care of the modification for you.